MD40FM MasterDrive™ Rerofit Kit System Features
Eliminates torque at the steering wheel Three different selectable levels of power give the boater the desired feeling on the wheel (PATENTED). Automatically reverts to manual mode in case of power loss. High efficiency, low Amp draw The system always running permits immediate control in any sea conditions Equipped with safety switch ON/OFF (SMART BUTTON) Can be used on dual station installations Suitable for use with autopilot Low noise Voltage: 12VDC CE marked in conformity with ABYC P21, ISO 10592 safety standards Ignition protected (SAE J-1171 and UNI EN 28846)
What's In The Box System Components 1 single packaged KIT MD40FM Dual Cylinder containing:- 1 UH40-F Front Mount Master Helm- 1 UPMD Power Unit, 15’ (4,5 m) wiring harness included- 1 UCMD User Interface
This is a standard Inboard kit that does not include Cylinders, Hose Kits and Steering wheel. See (suggested model chart below order guide) Please indicate what Cylinder model needed from chart below. You will also need to order Hose Kits (Not Included) and a Steering Wheel If required.
Optional Second Station Kit Not included with the above listed MD Kit1 KIT MD2: for dual stationFlexible hydraulic hoses1 Tilt mechanism X66-40613 M suitable for Tilt Mount Helm. Tilt range of 48° and five locking positions.1 Dual cylinder application Tie Bar: See Selection (Outboard Application Only)1 Steering Wheel: See Selection
1 Instruction manual
Note
The MasterDrive™ helms (both the UH Master and the UHD slave for a dual station), the UPMD Power Unit and the UCMD User Interface are the same products shown on the outboard MasterDrive™ system.For more details please refer to the outboard MasterDrive™ section. See Ordering Guide below.
I was having hard steering with my Honda 250 HP outboard on a Apex qwest pontoon. I purchased this kit and installed it. Feels like I'm driving my car. I can't believe the difference this kit made. It is expensive but worth it. Instillation can be tricky if your not mechanical.