T-H Adjustable Motor Support

The motor support is adjustable in length from 27 1/2" to 46 1/2" long. This adjustment covers a wide range of boat/engine combinations from outboard with offset transoms and jacking plates to inboard/outboard units. The aluminum adjustable tubing has a heavy wall thickness for strength. The end of motor supports are molded of black high impact plastic for both superior strength and good looks. The adjustment in length is accomplished with a stainless steel bolt/locknut combination and has predrilled holes for seven different length settings. To use simply determine length required for boat/motor combination, install bolt and nut, place "U" over rear center roller on trailer and trim engine down into molded vee; attach furnished rubber strap around lower unit.